Properly Caring For A Metal Rooftop

If you have a shed or garage with a metal rooftop, chances are you enjoy the protection it provides for your tools and landscaping equipment nestled in the structure underneath. There are a few steps one would want to take to ensure their metal roof lasts for years to come. Here are some tips a homeowner can take in caring for a metal rooftop so it retains its protection while looking great in the process.

Take Time To Tend To Gutters

If your shed or garage is not equipped with gutters, you may want to consider having them added so the structure’s foundation level is not at risk for overexposure to moisture after inclement weather. It is important to clean out the gutter system often so debris does not accumulate inside of these water diversion pieces.

When a gutter becomes filled with leaves, twigs, or dirt, water tends to become trapped in this area. When water isn’t flowing toward a downspout properly, it can push its way under the bottom of the metal roof above the gutter. This can lead to rusting or molding as a result. Get up on a ladder after storms to remove debris by hand and take time to periodically check the interiors for accumulating matter so it can be removed.

Remove Roof Debris Promptly

As with gutters, the rooftop itself needs to be cleaned regularly. When branches or other natural debris lands on your metal roof, it will allow moisture to accumulate underneath it. If this moisture sits for an extended time, it can rust the rooftop in these areas. Debris that is not removed promptly can also lead to some discolored portions of your roof as the sun will not fade the metal evenly. Sweep debris off your metal roof often to avoid these scenarios. If debris leaves behind a stain, use a non-abrasive brush to scrub a mild detergent over the area. Rinse well with a pressure washer afterward.

Care For Blemished Areas

If you notice an area of your metal roof where rust is present, it will need to be removed to improve the appearance of the metal. Use a piece of medium-grit sandpaper to rub away rust from the surface of your rooftop. Dab some rust-inhibiting primer over the area where rust had previously been noticed. When this dries in its entirety, use rust-inhibiting paint to give the spot a protective barrier so additional rust does not occur. 

Should you notice a scratch on your metal roof, adding a layer of mineral spirits will help dull its appearance. Rub the substance directly on the scratch and allow it to sit for several minutes. Rub it off with a piece of microfiber cloth. Add a coat of rust-inhibiting primer followed by a coat of rust-inhibiting paint to hide the scratch completely.

For more information, contact companies like GBS Enterprises Roofing.

Read More

Anticipating An Upcoming Excavation Project? Here’s What You Need To Do To Prepare

Whether you are planning to have an in-ground pool installed or just having some of your property somewhat rearranged, there is a good chance you will be working with an excavator to get the job done. While excavation at any level is a beneficial service, it can also require quite a large amount of planning and preparation. The heavy equipment used in the excavation process means that you should most definitely be prepared as a property owner so the project goes as seamlessly as possible. Here are a few things you should do before the planned start date of the excavation project to ensure you are fully prepared. 

Make alternative arrangements for your outdoor pets. 

If you usually have pets that roam the area, it is best to put them either inside the house or make arrangements for them to be situated in a different part of your property. Dogs, cats, and other animals who are roaming the area while the excavator is working can be in harm’s way, and you definitely don’t want them running freely around the excavating equipment while your project is underway. 

Clear the area of your property where work will be performed. 

It is only logical that anything in the area where the excavation will take place will have to be moved, but you will also need to clear the surrounding area as well. Make sure you remove everything from the area that could either be in the way or be at risk of getting damaged during the excavation process, such as:

  • lawn furniture
  • children’s outdoor playthings
  • your vehicles 
  • landscaping tools and equipment

Ensure there is a clear access point to the area where the work will be performed. 

Excavation will require large, heavy equipment to be on your property, which will mean they need a point where they can travel to and from the spot where they will be working. Make sure the crew has a clear-cut access point to the area by removing parked vehicles or other items from your property that could get in the way. Dump trucks, excavators, and other equipment can be fairly large, so they will need an ample amount of space to get through. 

With the proper level of planning, you will see your excavation project go off without a hitch. If you would like to know more about getting prepared, be sure to talk to an excavation company like Haas Construction for more advice. 

Read More

Answers to Two Common Questions About Steel-Fiber Concrete

Pouring a concrete slab or foundation is a big job, one that nobody wants to see undermined by cracks, crumbling, or other trouble down the line. A great way to ensure a durable, long-lasting surface is to utilize steel-fiber concrete. If you would like to learn more about this useful innovation, read on. This article will answer two common questions about steel-fiber concrete.

What is steel-fiber concrete?

Steel-fiber concrete is distinguished from other types of concrete by the addition of short steel fibers, also often referred to as steel wire. This improves the durability and crack-resistance of the concrete. The wire that is added may be one of five different types:

  • cold-drawn wire
  • cut-sheet fiber
  • melt-extracted fiber
  • mill-cut fiber
  • modified cold-drawn wire

The main difference between these fiber types is their relative tensile strength. Tensile strength, which may vary from between 50,000 to 445,000 psi, determines the wire’s resistance to deformation or breakage. Surfaces that will be exposed to higher amounts of surface stress tend to benefit from a steel fiber with a higher psi rating.

The effectiveness of steel-fiber concrete is also affected by the length of the added wires, which vary from roughly 1/4″ to 2″. In general, longer fibers add a greater amount of strength to the concrete. That said, they are also more difficult to mix evenly into the wet concrete mix.

What are the specific benefits of steel-fiber concrete?

As noted above, steel fiber is used to boost the lifespan of a concrete surface. It does this primarily by reducing the frequency and severity of crack formation, specifically plastic shrinkage cracks. These cracks tend to form during the curing process, as evaporating water causes the concrete to draw apart. Steel fiber increases the tensile strength of the concrete, helping it to overcome the dehydrating effects of curing.

The strengthening effects provided by steel fiber reduce the need for concrete expansion joints. Such joints, cut in the wet concrete using a concrete saw, are used to help reduce the likelihood of cracks occurring. Steel-fiber concrete allows the number of such joints to be drastically reduced, thus lowering the overall amount of site labor required.

The benefits of steel-fiber concrete don’t stop there, however. Steel fibers also act to increase the overall weight capacity of the fully-cured concrete. This means that slab thickness can be reduced without compromising its strength, thereby lowering material and installation costs. 

Visit sites such as http://www.unitstepjoliet.com to look at various concrete options. 

Read More

Got A Brand New Truck? 2 Tips To Keep It Looking New Without A Garage

If you have a brand new truck and do not have a garage to keep it in, it can easily get scratches and other damage due to the weather as well as debris that may hit it. Fortunately, there are some things you can do to keep this from happening, two of which are listed below.

Truck Bed Liner

The truck bed on your new truck can easily scratch, especially if you put anything in it. To keep this from happening, you should install a truck bed liner on your new truck. There are different types you can choose from including:

Drop-in Bed Liners

This type of liner is made of rubber or a durable plastic and is dropped into the bed of your truck. Drop-in bed liners are generally molded so that they fit the floor and sides for the model of your truck. They are snapped in place or held onto the bed with adhesive. There are small gaps underneath the liner so there is a chance debris can get under there, which would scratch the bed.

Spray-on Bed Liners

Spray bed liners are sprayed onto the bed of your truck using a high pressure spray gun. If you choose this type of liner, make sure you want it to be a permanent part of your truck because it is very difficult to remove once applied.

Brush-on Bed Liners

A thick liquid is painted onto the floor and sides of your truck bed using a roller or a brush. The liquid adheres to the bed so there are no gaps between the liner and the truck bed. It also has texture so things will not move around while you are hauling things in your truck.

Talk with the dealership or a business that installs bed liners for more information about these and other types.

Truck Vinyl Wrap

Another option you have is wrapping your truck with vinyl. The truck dealership may offer to do this for you, or you can find a professional fitter in your area to apply the wrap. Vinyl wrapping is covering the paint with a vinyl layer.

The surface of your truck will be thoroughly cleaned to remove any dust or other debris. They then cut the vinyl to fit your truck and apply it to all surfaces and edges on your truck. The technician will heat the vinyl and then stretch it as they are adhering it to the surfaces. It goes onto the surface much like a sticker. A type of squeegee is used to remove any air bubbles.

Truck wraps are not permanent and only last a few years, but while they are on your truck, they protect your paint from scratches and dings, as well as from sun damage. Talk with the technician on when you will need to have your truck rewrapped.

Doing both of these things will add a lot of protection to your truck to keep it looking new.

Read More

Get Your Yard Ready for a Summer Bonfire with Three Landscaping Tips

Lighting a bonfire in your backyard can be a fantastic way to enjoy the pleasant summer weather and spend time in the evening with friends or family. If you’re interested in how to go about lighting a bonfire in a safe and fun way, you need to make sure that your yard is up to the task. Instead of starting a fire right away, it’s a good idea to look into what you can do to make your yard safer.

With the following tips taken into consideration with your landscaping, you can make sure that there isn’t a major fire hazard so that the bonfire can be a fun experience.

Have an Empty Spot for the Bonfire

One of the best things that you can do to prevent a fire from getting out of control while having a bonfire is pick out a good spot for it. A lot of people make the mistake of having a bonfire in an area that has a lot of plants nearby, which leads to there being a higher chance of something catching on fire. Picking an empty spot, preferably on gravel or another flat surface without vegetation, can help make sure that your bonfire will not grow out of control by accident.

Clear Out Highly Flammable Items

Along with picking a good location that’s away from most items, you also need to clear out the space entirely. While you may want to have chairs nearby so that you can relax and even roast marshmallows, that is not a good idea if safety is your main concern. Instead, make sure to clear away flammable items so that the fire can grow large without as high of a risk of spreading.

Make Sure Safety Is Taken Seriously

Since you’ll likely have a number of people over while enjoying your summer bonfire, you need to make sure everyone is on the same page about safety. The fire can quickly grow out of control if everybody doesn’t know about how to control a fire and know what needs to be done if any sparks start moving away from the bonfire. For extra safety, you can even keep a fire extinguisher somewhere nearby on the off chance that the fire spreads by accident.

Planning a bonfire in the backyard is always a risk, and this makes it important that you get the yard ready ahead of time with the right landscaping and know what to do in case a fire breaks out of the main bonfire area.

For more ideas about how to create a spot for bonfires, visit sites like http://www.alpinefireplaces.com

Read More

Flower Options For Xeriscape Gardens

A xeriscaped garden doesn’t have to depend upon cactus plants, yuccas, or other succulents to provide a touch of color. There are many flowering plants that can grow well in low water conditions. The key is to pick plants that grow well in your natural climate with little outside irrigation. The following list can help you select a few options.  

Seasonal color

For color in spring, few options beat the flowering bulbs, which include daffodils, tulips, and hyacinths. Although bulbs do need water, they only need it for their short growth period, which fortunately coincides with moist spring weather. If you prefer annuals that don’t have high water needs, then consider orange-red California poppies, bright yellow creeping zinnias, or greenish-white dusty miller. These will flower or grow through summer needing only minimal amounts of water to thrive.

Pretty perennials

Many perennials can do well in a xeriscape bed. Always look first to plants that are native in your area. Your county extension office or a local nursery can help you. Columbine grows well in many climates and rarely needs extra water. The interesting flowers are available in nearly every color imaginable. Coneflowers, or echinacea, provide large bright purple blooms that thrive in dry soil. For a sunnier option, opt for bright yellow black-eyed Susan flowers. If dainty is your thing, delicate white shasta daisies are a good option. For a plant that makes a statement, consider red hot pokers. The tall flower spikes are each tipped with a cluster of flowers that are red at the tip, fading to yellow at the base, so that it truly resembles its name.

Adding height

Flower shrubs and sub-shrubs are another way to add color. Lavender can thrive almost anywhere as long as the soil is dry. This evergreen sends up purple flower spikes in early summer, with a second show sometimes occurring in late summer. Daylilies are another good option. Most varieties are yellow, although there are some red varieties, too. They bloom almost all summer. Watering can lead to increased flower production, but it’s not necessary. Another option with deep purple flower spikes is sage. This grows especially well in desert climates.

If you want even more height, perhaps as a hedge, consider serviceberries. These flowering trees feature white blooms in spring and edible berries in late summer.

Contact a landscaper in your area that focuses on xeriscaping. They can help you pick out the best blooms for your low water needs.  

Read More
Page 2 of 1012345...10...Last »

July 2017
« Jan