Posts by Sean Riviera

What To Consider When Renovating An Older Home

Older homes have a lot of classic designs and layouts but when you want to renovate one, you have to consider a few factors first. These factors can influence the type of work your home may need prior to completing your renovation. By taking the opportunity to have your home inspected, you can avoid potential problems that will delay your remodeling project.

Possible Asbestos Problem

One possible problem that you can encounter is asbestos. In many older homes, asbestos was used in several types of building materials such as old vinyl flooring, cement wall sheets and wall insulation. If you think that your home has asbestos, you should not try to remove it on your own.

Asbestos is dangerous when the small fibers get into the air and you breathe them in. Leaving it alone and having the surfaces tested is your best course of action. You want to hire a company that specializes in identifying and dealing with this material.

Additionally, if the asbestos-covered item is in good condition, you can have the company seal the surface instead of removing the asbestos. Sealing the surface prevents the fibers from getting into the air and this method can be an alternative option when it would be too difficult to remove it completely from your home.

Structural Issues

Another issue you can face when renovating an older home is structural instability. If you are planning to change the layout of a room or build an addition, you need to make sure that the current structure can withstand the changes.

Load-bearing walls, for example, can only handle a specific amount of weight before they fail. Even a simple change such as using heavier materials can compromise this area of your home.

To prevent these types of issues, you want to consult a structural engineer. This individual has the training and knowledge required to identify potential problems with your new design concept. The engineer will look at your foundation, infrastructure and building envelope, which helps them locate structural issues that could cause walls to fail or your foundation to crack.

Utility Problems

Unfortunately, unless your home has been remodeled in the past, you may have an issue with your home’s utilities. Older wiring and plumbing systems may not meet the current standards for your area. If left alone, you could have issues with electrical wires fraying or your sewer lines may fail as well.

The idea of replacing your home’s electrical wiring and plumbing is not a fun concept. However, you need to bring these items up to code so your remodeling project can past the inspections your local government requires. For dealing with this issue, you want to have each area of your home inspected, so that any outdated utilities can be found and replaced.

When renovating an older home, you need to think about potential issues. Considering these issues in advance can allow you to deal with them before your remodeling project starts, which may also help you avoid some delays with the work you need done. For more questions about remodeling or asbestos, contact a company like IRS Environmental of WA Inc.

Read More

Want a Stained Glass Look? How to Add Decorative Film Your Glass Door

If you love the way that stained glass looks, you can use decorative film to transform the glass door at your business into one that looks as if it is made out of this material. Decorative film is easy to apply and will not damage the glass or cause sticky residue to form on the surface. It will also enhance the beauty of your door and provide you with privacy. Read below to learn how to install this material. 

Use These Items

  • glass cleaner
  • clean cloth
  • decorative film (sold at home improvement centers)
  • squeegee
  • spray bottle
  • mild soap
  • water
  • ruler
  • utility knife

Clean the Door & Prepare the Surface

Remove residue from the surface of the glass by cleaning it off with glass cleaner and a dry cloth. Add a small amount of mild soap into a spray bottle. Fill the remainder of the bottle up with water. Shake well. This mixture will assist with getting the decorative film to stick to the surface. Spray the glass surface with the soap and water, making sure that the entire area is covered.

Add the Film

Slowly add the decorative film to the door. Begin in one corner, lining the film up evenly with the edge of the glass. Peel a small amount of the adhesive backing off and press the film onto the glass. Continue adding the film, being careful not to wrinkle any of the material. Once the film is attached, secure it by adding an even coating of the soap and water to the top of it.

Use a squeegee to help flatten out the film. Start in the middle of the door and press the squeegee outwards until it reaches the edge of the film. Use the squeegee to cover all parts of the glass surface.

Trim the Edges & Maintain the Film

Hold up a ruler around the sides of the film to make sure that it is even. If any parts of the film are longer than others or hanging over the edge of the glass, trim them with a utility knife. Be careful that you do not gouge the glass or frame with the knife. The film will look great for a long time as long as you keep it clean. Standard glass cleaner can be sprayed on it whenever it becomes dirty. One of the benefits about using decorative film is that it can easily be changed in the future if you ever want to give your door a new look. For more ways to spruce up your door, talk to resources such as S & J Door Inc.

Read More

Four Tips To Help You Find The Best Place To Drill Your Water Well

Looking to have a water well drilled? There are many things to consider when looking for water, such as the height of the water table on your property. You also will want to consider the distance from your home and utilities that you may have to have installed for your water well. If you want to find the best place to drill your water well, here are four tips that can help you:

1. Finding Out The Depth Of Your Water Table

You will want to determine the depth of the water table where you are planning on having a well drilled. This will give you an idea of how deep you need to drill your well. This can be done by the drilling service to know where the best place to drill your well is. Sometimes there are also geological surveys available from the USGS, which can give you an idea of where the water table is on your property and some of the materials you may need to drill through.

2. Choosing An Area That Is Easiest To Drill

You also want to find an area that is easiest to drill your well. This may be an area with soft soil or sand. You will want to try to avoid drilling through rock because this can make the drilling process more difficult. Sometimes you may not be able to avoid drilling through rock to get to water. If you have to drill through rock for your well, you will want to have the help of a professional drilling service that has the equipment for this.

3. The Distance To Keep Your Well From Your Home

When you are drilling a well for water for your home, you want to consider the distance that you drill it from your home. You may want to have it a safe distance from your home, but remember that the further from your home the well is, the more it will cost to install things like electricity and pipes to get the water to your home.  You may want to consider a solar-powered pump with a battery backup if your well is too far from your home.

4. Simple Signs Of Water In Dry Areas

Not every water well is drilled in perfect conditions with water that is just below the surface. In some dry climates you will have to look for signs of water to drill your well. You will want to look for obvious signs such as plants and wildlife that need water to live.  Other signs of water can be things like dry riverbeds and low-lying areas where water may collect.

These are some tips to help you find the best place to drill your well. If you need help with drilling your well, you can contact a drilling service. They can also do a geological survey to suggest the best place for your water well. For more information, contact a company like Hudson Valley Drilling with any questions or concerns you might have.

Read More

Three Roofing Materials That Help You Save Money On Cooling Costs

If you focus your efforts on cooling off your home once it heats up in the first place, your cooling bills will never be as cool as they could be. AC units will do nothing to prevent heat from pouring into your home; they can only combat the heat in your home once your home has already heated up. Some roofs will let heat into you home, while other roofs will protect your home against heat so that your AC equipment does not have to work as hard, and you save money.

How Clay Tiles Help Vent Your Roof

Clay tiles typically come in an S shape. The ridges in the tile create channels, which are very helpful in venting heat away from your home. As the tiles heat up, the heat from the tiles leaks into the channels underneath the tiles. Because heat rises, it will then travel up the channels to specially designed tiles in the ridge line, which allow the heat to escape away from your home.

How Metal Roofs Reflect Heat Away from Your Roof

A metal roof will have a natural reflectivity. By reflecting UV rays away from your home, metal roofs will deflect heat before it has a chance to seep into your home. When compared to asphalt shingles, which absorb heat, metal roofs will keep your home cooler and reduce your cooling costs by up to 20%.

How a White Roof Protects Your Home

The material a roof is made from is important, but it is not the only feature you should look for. Color can have a huge impact on how much heat your roof absorbs. The lighter your roof is, the less heat it will absorb from the sun, and the more you will save on cooling costs. Simply switching to a white roof can save up to 20% on your cooling costs. 

When you choose a roof for your home, you cannot focus solely on buying a roof that will keep precipitation out. Instead, you must also think about the role your roof will play in keeping heat out. While buying a clay tile or metal roof might cost more money than installing asphalt shingles, you can make up the money you spend on your roof with the money you save on cooling costs. There is no sense in overpaying for heating costs when you can easily do something to prevent your home from heating up and thus keep your cooling bills down. Speak to a contractor, such as McCullers Roofing, for more information.

Read More

What A Plumber Can Do When You Are Renovating Your Home

If you are getting ready to renovate your entire home, you are going to want to consider hiring a plumber to help you with a few projects around the house. In order to know just why this is so important, you are going to want to review the following points. This way, you will be able to renovate your home in the best possible manner.

Change The Location Of The Kitchen Sink

Sure, you might have grown used to the current location of the kitchen sink, but have you ever tried to imagine what it might be like in a different spot in the kitchen? You might want to change it to a corner sink or a sink that sits in a kitchen island. Either way, you are going to want to hire a plumber to move the water lines. While he is at it, you might also want to take advantage of this moment to move your refrigerator to another spot. When you do that, your plumber will be able to run the new refrigerator water lines if you have a unit that gives cold water or ice on the door or within the freezer itself.

Inspects The Quality Of Existing Pipe Work

When you are completely gutting all of the walls, you will find that you are exposing a good amount of water lines. Unless you are completely removing all of the pipes, you will want a licensed plumber inspecting everything. Your trusted plumber will check to make sure that none of the pipes are cracked, rusted, or falling apart at the joints. If there is a problem, it can be corrected before the pipes start leaking water everywhere. It is vital that you are having this inspection completed as soon as you open the walls. This way, should there be the need for some repairs or replacements, there will be plenty of time to do that before you have to close the walls back up.

Installation Of New Outside Faucets

Since some of the water lines for the additional outside faucets will be in your exterior walls, you will want this job to be completed while you are in the middle of your home renovation project. This way, once the new water lines are run, you will be able to seal up the walls and carry on with the rest of the project.

As you can see, there are multiple things a plumber can do when you are renovating your home. All you need to do is to make sure that you are finding the best possible plumber and quickly schedule you initial appointment. For more information, contact a local plumbing company, like Aumenta Plumbing & Heating Co.

Read More
Page 10 of 12« First...89101112

June 2017
S M T W T F S
« Jan    
 123
45678910
11121314151617
18192021222324
252627282930