Posts made in September, 2016

Three Tips For Keeping Your Air Conditioning System Efficient

An air conditioning system can be one of the more expensive appliances for you to use. However, it is an unfortunate fact that there are many individuals that are uninformed when it comes to getting the most from these systems. To help you keep your home comfortable without breaking your budget, you should keep these simple tips in mind.

Invest In High-Efficiency Air Filters

The air filter is an essential part of your air conditioning system. However, you may assume that all of these filters are the same, and this is not the case. High-efficiency air filters are designed so that they minimize the resistance of air entering into the unit. This can help the system more efficiently cool and circulate air throughout your home, which can help to reduce the energy the system requires. These air filters will have a slightly higher cost than traditional ones, but the energy savings can more than offset this higher expense.  

Keep The Exterior Unit In The Shade

The exterior air conditioning unit will reach extremely hot temperatures due to being exposed to the sun’s light and heat. This can severely decrease the performance of the system, as it will have to work much harder to compensate for this additional heat. To help minimize this problem, you may need to install an awning. If you are concerned about the effect the awning will have on the appearance of your home, you should consider installing a retractable awning so that you only need to extend it on the hottest days of the year.

Apply UV Reflective Tints To Your Home’s Windows

The windows can be one of the biggest sources of energy loss in your home. This can be particularly true during the summer months as the sun’s rays of light enter your home. Fortunately, this can be easily combated by using reflective window films. By installing these films, you can help to prevent the sun’s most intense heat from entering your home without impacting your ability to see out your window.

It can take some proactive steps to ensure that your air conditioning system is working as efficiently as possible. To help you prevent your system from costing more than necessary to run, you should utilize high-efficiency air filters, keep the exterior unit in the shade and install UV reflective window films. These simple steps can dramatically lower your home’s energy usage without forcing you to compromise on the comfort in your home.

Read More

Properly Caring For A Metal Rooftop

If you have a shed or garage with a metal rooftop, chances are you enjoy the protection it provides for your tools and landscaping equipment nestled in the structure underneath. There are a few steps one would want to take to ensure their metal roof lasts for years to come. Here are some tips a homeowner can take in caring for a metal rooftop so it retains its protection while looking great in the process.

Take Time To Tend To Gutters

If your shed or garage is not equipped with gutters, you may want to consider having them added so the structure’s foundation level is not at risk for overexposure to moisture after inclement weather. It is important to clean out the gutter system often so debris does not accumulate inside of these water diversion pieces.

When a gutter becomes filled with leaves, twigs, or dirt, water tends to become trapped in this area. When water isn’t flowing toward a downspout properly, it can push its way under the bottom of the metal roof above the gutter. This can lead to rusting or molding as a result. Get up on a ladder after storms to remove debris by hand and take time to periodically check the interiors for accumulating matter so it can be removed.

Remove Roof Debris Promptly

As with gutters, the rooftop itself needs to be cleaned regularly. When branches or other natural debris lands on your metal roof, it will allow moisture to accumulate underneath it. If this moisture sits for an extended time, it can rust the rooftop in these areas. Debris that is not removed promptly can also lead to some discolored portions of your roof as the sun will not fade the metal evenly. Sweep debris off your metal roof often to avoid these scenarios. If debris leaves behind a stain, use a non-abrasive brush to scrub a mild detergent over the area. Rinse well with a pressure washer afterward.

Care For Blemished Areas

If you notice an area of your metal roof where rust is present, it will need to be removed to improve the appearance of the metal. Use a piece of medium-grit sandpaper to rub away rust from the surface of your rooftop. Dab some rust-inhibiting primer over the area where rust had previously been noticed. When this dries in its entirety, use rust-inhibiting paint to give the spot a protective barrier so additional rust does not occur. 

Should you notice a scratch on your metal roof, adding a layer of mineral spirits will help dull its appearance. Rub the substance directly on the scratch and allow it to sit for several minutes. Rub it off with a piece of microfiber cloth. Add a coat of rust-inhibiting primer followed by a coat of rust-inhibiting paint to hide the scratch completely.

For more information, contact companies like GBS Enterprises Roofing.

Read More

Anticipating An Upcoming Excavation Project? Here’s What You Need To Do To Prepare

Whether you are planning to have an in-ground pool installed or just having some of your property somewhat rearranged, there is a good chance you will be working with an excavator to get the job done. While excavation at any level is a beneficial service, it can also require quite a large amount of planning and preparation. The heavy equipment used in the excavation process means that you should most definitely be prepared as a property owner so the project goes as seamlessly as possible. Here are a few things you should do before the planned start date of the excavation project to ensure you are fully prepared. 

Make alternative arrangements for your outdoor pets. 

If you usually have pets that roam the area, it is best to put them either inside the house or make arrangements for them to be situated in a different part of your property. Dogs, cats, and other animals who are roaming the area while the excavator is working can be in harm’s way, and you definitely don’t want them running freely around the excavating equipment while your project is underway. 

Clear the area of your property where work will be performed. 

It is only logical that anything in the area where the excavation will take place will have to be moved, but you will also need to clear the surrounding area as well. Make sure you remove everything from the area that could either be in the way or be at risk of getting damaged during the excavation process, such as:

  • lawn furniture
  • children’s outdoor playthings
  • your vehicles 
  • landscaping tools and equipment

Ensure there is a clear access point to the area where the work will be performed. 

Excavation will require large, heavy equipment to be on your property, which will mean they need a point where they can travel to and from the spot where they will be working. Make sure the crew has a clear-cut access point to the area by removing parked vehicles or other items from your property that could get in the way. Dump trucks, excavators, and other equipment can be fairly large, so they will need an ample amount of space to get through. 

With the proper level of planning, you will see your excavation project go off without a hitch. If you would like to know more about getting prepared, be sure to talk to an excavation company like Haas Construction for more advice. 

Read More

Answers to Two Common Questions About Steel-Fiber Concrete

Pouring a concrete slab or foundation is a big job, one that nobody wants to see undermined by cracks, crumbling, or other trouble down the line. A great way to ensure a durable, long-lasting surface is to utilize steel-fiber concrete. If you would like to learn more about this useful innovation, read on. This article will answer two common questions about steel-fiber concrete.

What is steel-fiber concrete?

Steel-fiber concrete is distinguished from other types of concrete by the addition of short steel fibers, also often referred to as steel wire. This improves the durability and crack-resistance of the concrete. The wire that is added may be one of five different types:

  • cold-drawn wire
  • cut-sheet fiber
  • melt-extracted fiber
  • mill-cut fiber
  • modified cold-drawn wire

The main difference between these fiber types is their relative tensile strength. Tensile strength, which may vary from between 50,000 to 445,000 psi, determines the wire’s resistance to deformation or breakage. Surfaces that will be exposed to higher amounts of surface stress tend to benefit from a steel fiber with a higher psi rating.

The effectiveness of steel-fiber concrete is also affected by the length of the added wires, which vary from roughly 1/4″ to 2″. In general, longer fibers add a greater amount of strength to the concrete. That said, they are also more difficult to mix evenly into the wet concrete mix.

What are the specific benefits of steel-fiber concrete?

As noted above, steel fiber is used to boost the lifespan of a concrete surface. It does this primarily by reducing the frequency and severity of crack formation, specifically plastic shrinkage cracks. These cracks tend to form during the curing process, as evaporating water causes the concrete to draw apart. Steel fiber increases the tensile strength of the concrete, helping it to overcome the dehydrating effects of curing.

The strengthening effects provided by steel fiber reduce the need for concrete expansion joints. Such joints, cut in the wet concrete using a concrete saw, are used to help reduce the likelihood of cracks occurring. Steel-fiber concrete allows the number of such joints to be drastically reduced, thus lowering the overall amount of site labor required.

The benefits of steel-fiber concrete don’t stop there, however. Steel fibers also act to increase the overall weight capacity of the fully-cured concrete. This means that slab thickness can be reduced without compromising its strength, thereby lowering material and installation costs. 

Visit sites such as http://www.unitstepjoliet.com to look at various concrete options. 

Read More

September 2016
S M T W T F S
« Aug   Nov »
 123
45678910
11121314151617
18192021222324
252627282930